Ontario Truck Driver Test 08

Taking the Ontario Truck Driver’s Licence Practice Test is an essential step in becoming a licensed commercial driver in Ontario. The practice test provides invaluable insight into the types of questions that will be asked on the actual exam, offering drivers the opportunity to assess their knowledge and identify areas that may require improvement. The practice test is designed to be challenging, consisting of questions on topics ranging from vehicle safety to driving techniques and regulations. Drivers who successfully pass the practice test will be better prepared to take the actual Ontario Truck Driver’s Licence Exam, helping them to succeed and begin their career as a professional commercial driver. It is important to note that the practice test should not be relied upon as the sole preparation method for the exam, but should be used in conjunction with other forms of study and preparation. With dedication and hard work, obtaining a commercial driver’s license can lead to a rewarding and lucrative career.

1 / 30

A vehicle has a major defect when the air pressure drops in one minute more than the prescribed limit of how much for a Class D vehicle?

5 psi in one minute

2 psi in one minute

4 psi in one minute

3 psi in one minute

2 / 30

How many backing maneuvers will you be required to perform during the test?

None

Two

One

Three

3 / 30

What is the purpose of the backing skills test?

To test skills essential for the safe control of the vehicle while reversing into a desired location

The show your ability to use a spotter

None of the above

To show how to use the appropriate skills

4 / 30

With some of the new diesel engines, you should downshift and up-shift at approximately what rpm?

800 and 1100 rpm

Whenever you feel its necessary

600 and 900 rpm

1200 and 1600 rpm

5 / 30

Which statement is false? It is a minor defect when any suspension fastener is...

Wrong

Broken

Missing

Loose

6 / 30

During the uncoupling and coupling portion of the test, what you must demonstrate?

That you can safely uncouple and couple a truck/tractor and trailer

That you can follow the steps outlined in the training manual with only brief glances at the manual

That you can properly position the vehicle with the guide of a spotter

All of the above

7 / 30

Which of the following is not part of inspecting the fuel system?

Fuel cap(s) are not missing

Fuel smell is not unusual

Fuel tank(s) are secure; where accessible, inspect straps to ensure they are attached

Fuel is not leaking from the fuel tank(s) or dripping from anywhere from the vehicle including under engine compartment and fuel tanks

8 / 30

When a wiper blade is damaged or missing, or when it won't clear the area of the windshield in front of the driver, how is it reported?

It should be noted but not reported

None of the above

A minor defect

A major defect

9 / 30

A vehicle has a major defect when the air pressure drops in one minute more than the prescribed limit of how much for a Class A vehicle?

5 psi in one minute

4 psi in one minute

3 psi in one minute

2 psi in one minute

10 / 30

Which statement is false? It would be a minor defect when any necessary emergency equipment is...

Doesn't work properly

Missing

In the wrong place

Damaged

11 / 30

Which statement is false? It is a major defect when any part of a leaf spring or suspension part is...

Missing

Is in contact with another vehicle component

Has shifted out of place

Heavily rusted

12 / 30

If a fuel cap is missing, how is it reported?

As a major defect

As a minor defect

Verbally inform the vehicle owner

It's not reported

13 / 30

When the low-air warning fails to activate or activates before air pressure drops below 55 psi, what kind of defect is it?

Written notification

Major

It's not a defect but should be looked at

Minor

14 / 30

When any seat belt or tether belt is insecure, missing or malfunctions, how is it reported?

As a minor defect

It s not a defect, but needs to be noted

It's not but needs to be adjusted

As a major defect

15 / 30

Are you required to listen for an audible air leak?

Only if the pressure drops below 80 psi

Yes

Only if the pressure drops below 40 psi

16 / 30

When a wheel seal is leaking, what could happen?

The wheel bearing can fail

All of he above

It could tear the rest of the seal

The seal could get loose and fall out

17 / 30

When are commercial vehicles allowed in the High-Occupancy Vehicle (HOV) lane?

When the vehicle is a Class A vehicle

They can't

Commercial motor vehicles must have two or more people in the vehicle and be less than 6.5 metres in total length to be in the HOV lane

When the vehicle is a class 2 vehicle

18 / 30

To measure applied pushrod stroke, what should the air pressure be?

Above 90 psi

Above 110 psi

Below 80 psi

Above 100 psi

19 / 30

When the attachments for any required mirror or other glass are broken or damaged, how is it recorded?

A minor defect

A major defect

It's not a defect

It's not a defect if it's repaired or replaced

20 / 30

What is not considered a fuel-consumption technique?

Get going as quickly as you can

Manage your road speed

Be an rpm miser

Control your idling

21 / 30

How long should you let your vehicle warm up before driving away if the temperature is below 0 degrees Celsius?

1 minute

15 minutes

3 to 5 minutes

7 to 10 minutes

22 / 30

Which of the following is not a procedure while inspecting the brake fluid reservoirs?

There is no brake-fluid leak

Brake-fluid reservoir is not less than one-quarter full

Brake fluid is above the minimum required level

Brake fluid does not have an unusual thickness

23 / 30

What is not an advantage of progressive shifting?

Reduces equipment wear

Saves fuel

Decreases noise levels

Saves tire wear

24 / 30

While inspecting the hydraulic brake system, how is it reported when the brake fluid level is below the mark indicating the minimum level as determined by the manufacturer?

Minor

Major

It's not if you add some fluid immediately

It's not but should inform the carrier

25 / 30

When there is visual evidence that a wheel, hub or bearing failure could occur, how is it reported?

A major defect

Verbally inform the carrier

A minor defect

It's not a defect

26 / 30

Which of the following is not a major defect while inspecting the vehicle and any cargo body frame?

bent section

a crack

Excessive rust

deformed part or section in the frame or cargo body

27 / 30

Which statement is false? When inspecting the windshield wipers and washers, what are you looking for?

The wiper blade is stiff

The windshield wipers and washers function properly in all directions

Any wiper blade is not damaged or missing

They will clear the windshield

28 / 30

A vehicle has this minor defect when it takes longer than two minutes for air pressure to build up to what psi?

85 to 100 psi

60 to 80 psi

130 to 135 psi

110 to 120 psi

29 / 30

What type of defect is it when air escapes from the service line during service-brake application, when the trailer supply valve is closed?

It's not a defect but needs to let the carrier know

A minor defect

Not a defect but should make a written note

A major defect

30 / 30

What kind of violation is it when the pushrod stroke of any brake is longer than the prescribed limit?

Minor

It's not, but should be checked again the next day

Major

It's not but needs to be reported

Your score is

Ontario Truck Driver Test 08

About

Practice Tests

Getting a License

Get In Touch